Thatcher CX4 August 3 2022 Build
-
Bill and Bob N place a bulkhead into the fuselage -
Bill and Doug working on the bulkhead -
Bill Martin cutting the bulkhead for the long eron -
Bill Martin filing a bulkhead eron cutout -
Bob F checking the drawing for the control stick layout while Matt flutes a bulkhead -
Bob F makes a jig for the control stick -
Bob F measures the control stick -
Bob Fairbanks making a fixture for welding the control stick -
Bob Fairbanks making a jig to hold the control stick -
Bob Fairbanks Matt Langbein and Kurt Stofko discussing fluting a bulkhead -
Bob Newman fitting a new bulkhead into the fuselage -
Bob Newman looks on while Bill Matin moves a long eron -
Charlie Conley checks the demensions of the fuselage while Bill makes a cutout for the long eron -
Cutting a bulkhead to attach a long eron -
Doug McQueen working on a bulkhead -
Doug working on the long eron layout -
Fluted bulkhead on a jig -
Matt Langbein fluting a bulkhead -
Matt looking at a fluted bulkhead -
Measuring the bulkhead structure -
Wayne works on drilling a rudder piece while Kurt and Debbie look on as Matt flutes a blukhead -
Working on an eron
